A cutting-edge workhorse, the Motorola MOTOTRBO R2 combines durability and ergonomics to guarantee confident and easy handling.
Tough enough for construction sites, the R2 ensures a reliable workday without interruptions.
R2 KEY FEATURES
BLOCK OUT THE NOISE
Loud noise can make for unproductive, unsafe workspaces. Motorola R2’s feature SINC+ is a noise suppressor that uses advanced algorithms to single out and eliminate disruptive background noise. Communicate with clarity to stay safe near loud compressors, engines, plant equipment and more.
GO THE DISTANCE
MOTOTRBO R2 has you covered with voice clarity and background noise suppression, but what if your workforce is spread out over a large job site, warehouse or field? Expect superior range; high receiver sensitivity, high efficiency antennas and high interference immunity promise clear audio over a long distance, even in noisy environments.
FULL-SHIFT LIFE
With MOTOTRBO R2’s slim, high-density battery lasting up to 26 hours, it won’t wear down before shift change. And the R2 won’t catch you off guard; press the PTT button to see the LED light, which blinks red to signal a low battery charge state.
The R2 supports a wide range of Motorola 2-Pin audio accessories which can be found here Motorola 2-Pin Audio Accessories.
| WATCH THE VIDEO: Introducing MOTOTRBO R2. | ||
 |
MOTOROLA MOTOTRBO R2 MODEL NUMBERS
AZH11JDC9JA2AN-AU MOTOTRBO R2 136-174 5W
AZH11QDC9JA2AN-AU MOTOTRBO R2 400-470 4W
AZH11XDC9JA2AN-AU MOTOTRBO R2 450-527 4W
| GENERAL SPECIFICATIONS | : |
|---|---|
| Frequency Range | VHF 136-174 MHz |
| Channel Capacity | 64 |
| Weight | 261 grams with PMNN4600 slim battery |
| Dimensions | 125 mm x 55 mm x 32 mm with PMNN4600 slim battery |
| TRANSMITTER SPECIFICATIONS | : |
| Transmitter Power | VHF 1W/5W |
| Channel Spacing | 12.5 kHz, 25 kHz |
| 4FSK Digital Modulation | • 12.5 kHz Data Only: 7K60F1D & 7K60FXD |
| Digital Protocol | • ETSI TS 102 361-1, -2, -3 |
| Conducted/Radiated Emissions (TIA603D) | • -36 dBm < 1 GHz |
| Adjacent Channel Power | • 60 dB @ 12.5 kHz |
| Frequency Stability | +/-0.5 ppm |
| RECEIVER SPECIFICATIONS | : |
| Analogue Sensitivity (12dB SINAD) | 0.18 µV (typical) |
| Digital Sensitivity (5% BER) | 0.16 µV (typical) |
| Intermodulation (TIA603D) | > 70 dB |
| Adjacent Channel Selectivity, (TIA603A)-1T | • 60 dB @ 12.5 kHz |
| Adjacent Channel Selectivity, (TIA603D)-2T | • 55 dB @ 12.5 kHz |
| Spurious Rejection (TIA603D) | > 70 dB |
| AUDIO SPECIFICATIONS | : |
| Digital Vocoder Type | AMBE+2 |
| Audio Response (TIA603D) | TIA603E |
| Audio Output Power (Rated/Max) | 1 W / 3 W |
| Audio Distortion at Rated Audio | 3% (typical) |
| Maximum speech loudness (ISO 532B) | 101 phon |
| Hum and Noise | • -45 dB @ 12.5 kHz |
| ENVIRONMENTAL SPECIFICATIONS | : |
| Operating Temperature | -30 °C to 60 °C |
| Storage Temperature | -40 °C to 85 °C |
| Thermal shock | Per MIL-STD 810C, D, E, F, G, H |
| Humidity | Per MIL-STD 810C, D, E, F, G, H |
| Electrostatic discharge | IEC 61000-4-2 Level 4 |
| Dust and water intrusion | IEC60529 IP55 |
| Salt fog | Per MIL-STD 810C, D, E, F, G, H |
| Packaging test | Per MIL-STD 810C, D, E, F, G, H |
