Motorola CLP/DLR/Curve Cloning Cable Kit HKKN4028 HKKN4028A

Motorola DLR1060, CLP107, CLP117, CLP107e and Curve Cloning Procedure using the HKKN4028 cable.

Source Radio: Radio to be cloned.
Target Radio: Radio to which the configuration of the “Source Radio” is to be copied.

The HKKN4028 cable is not for radio programming. This cable only supports radio-to-radio cloning. To program your DLR or Curve radios you require the HKKN4027 USB cable and programming software.

Curve to Curve Cloning

The following procedure requires 2x PMPN4648 Single Unit Chargers.

1. Turn the Curve radios off.
2. Unplug any cables from the Single Unit Chargers.
3. Plug one side of the cloning cable mini USB connector to the first Single Unit Charger, and the other end to the second Single Unit Charger.
4. Turn on the Target Radio and place it into one of the Single Unit Charger.
5. Turn on the Source Radio while pressing press the Push-to-talk button (PTT) and Volume Down button at the same time for three seconds. You should hear the Cloning Mode beeps, and the “Cloning Mode, Serial” voice prompt from your radio.
6. Place the Source Radio in its Single Unit Charger then press and release the Volume Up button.

If the cloning was successful, you will hear a “Pass” voice prompt from the Source Radio, if unsuccessful you will hear the “Fail” voice prompt. Once you have completed the cloning process, you should turn the radios OFF and ON to bring them to normal user mode.

DLR1060 to DLR1060 Cloning

The following procedure requires 2x PMLN8034 Single Unit Chargers.

1. Turn the DLR radios off.
2. Unplug any cables from the Single Unit Chargers.
3. Plug one side of the cloning cable mini USB connector to the first Single Unit Charger, and the other end to the second Single Unit Charger.
4. Turn on the Target Radio and place it into one of the Single Unit Charger.
5. Turn on the Source Radio while pressing press the Push-to-talk button (PTT) and Volume Down button at the same time for three seconds. You should hear the Cloning Mode beeps, and the “Cloning Mode, Serial” voice prompt from your radio.
6. Place the Source Radio in its Single Unit Charger then press and release the Volume Up button.

If the cloning was successful, you will hear a “Pass” voice prompt from the Source Radio, if unsuccessful you will hear the “Fail” voice prompt. Once you have completed the cloning process, you should turn the radios OFF and ON to bring them to normal user mode.

DLR1060 to Curve Cloning

The following procedure requires 1x PMPN4648 Single Unit Charger (Curve) and 1x PMLN8034 Single Unit Charger (DLR1060)

1. Turn the Curve and DLR radios off.
2. Unplug any cables from the Single Unit Chargers.
3. Plug one side of the cloning cable mini USB connector to the first Single Unit Charger, and the other end to the second Single Unit Charger.
4. Turn on the Target Radio (Curve) and place it into one of the Single Unit Charger.
5. Turn on the Source Radio (DLR) while pressing press the Push-to-talk button (PTT) and Volume Down button at the same time for three seconds. You should hear the Cloning Mode beeps, and the “Cloning Mode, Serial” voice prompt from your radio.
6. Place the Source Radio in its Single Unit Charger then press and release the Volume Up button.

If the cloning was successful, you will hear a “Pass” voice prompt from the Source Radio, if unsuccessful you will hear the “Fail” voice prompt. Once you have completed the cloning process, you should turn the radios OFF and ON to bring them to normal user mode.

CLP to CLP Cloning

The following procedure requires 2x PMPN4018 Single Unit Chargers

1. Turn the CLP radios off.
2. Unplug any cables from the Single Unit Chargers.
3. Plug one side of the cloning cable mini USB connector to the first Single Unit Charger, and the other end to the second Single Unit Charger.
4. Turn on the Target Radio and place it into one of the Single Unit Charger.
5. Turn on the Source Radio while pressing press the Push-to-talk button (PTT) and Volume Down button at the same time for three seconds. You should hear the Cloning Mode beeps and see the illuminated ring around the Motorola logo on the CLP blinking yellow.

If the cloning was successful, you will hear a Pass tone from the Source Radio, if unsuccessful you will hear the Fail tone (bonk tone). Once you have completed the cloning process, you should turn the radios OFF and ON to bring them to normal user mode.