The CSA Series arrays are based on the popular OA Series dipole array antennas. Supplied in “kit” form these antennas (CSA20-41-DIN) are delivered in flat-pack packaging to minimise freight and warehousing issues and allow for simplified assembly at time of installation.
The CSA Series arrays are based on the popular OA Series dipole array antennas. Supplied in “kit” form the these antennas (CSA20-41-DIN) are delivered in flat-pack packaging to minimise freight and warehousing issues and allow for simplified assembly at time of installation. The CSA Series arrays have approximately 60 degrees horizontal beamwidth and offer 7 or 9dBd in gain. The use of the corner screen reflector boosts the front to back ratio considerably allowing for tailoring antenna patterns for frequency re-use in extended networks.
With all welded construction and superior internal harness construction the antennas provide not only excellent radiation characteristics but also defined, high levels of intermodulation and noise suppression. IM performance is -140dBc based on a two carrier test. The entire array rests at ground potential and offers the ultimate in lightning
resistant antennas.
Features:
- Offset (cardioid) pattern with 60 Degree nominal Horizontal Beamwidth
- High front to back ratio to allow frequency re-use by tailoring coverage areas
- Hermetically sealed internal PTFE based phasing harness capable of 750W continuous
operation
- Shipped unassembled for ease of handling, easily assembled on site
- Direct DC grounded for lightning protection and reduction of precipitation static noise
- Industry leading dual sectioned antenna PIM rating (-140dBc)providing low IM and low noise
characteristics for optimum performance
- The screen can be purchased to retrofit to an existing OA series array or side mount dipole. See table below;
CSA20-41-DIN Specifications
| Weight | 32 kg |
|---|---|
| Dimensions | 2600 mm |
| vswr | <1.7 :1 (11.7dB) |
| termination | 7/16 DIN female on cable tail 500mm |
| power w | 750 |
| frequency product name | 148 – 170MHz |
| base vhf frequency | 136-175 MHz |
| mounting area | Clamps included to suit pole diameter 50-90mm |
| construction | Welded aluminium, corrosion protection plating |
| nominal gain dbd | 9 |
| horizontal beamwidth | 62 |
| passive im 3rd order 2x20w dbc | -140 |
| tuned bandwidth | Full band |
| vertical beamwidth | 35 |
| front back ratio db | 24 |










